| Post Date: | Nov 29,2021 |
| Expiry Date: | May 28,2022 |
| Detailed Description: |
Product Name: Release Agents for Die Casting Molds Model: SilibaseRA-4ZAL Usage Description: ● The recommended usage (dilution ratio): General processing: 1:120, complex processing: 1:100. Please according to the technology personnel deployment test concentration, finally to determine the best dilution ratio! ● The typical usage: 1kg release agent mixed with 100kgs purified water or mixed with 100 ~ 120 kgs diesel oil. ● If b e y o n d the typical usage, please contact us for technical support. ● Please use deionized water to dilute, helps to prolong the life of working liquid, reduce the use amount of concentrate, fully reflects the performance of the process fluid. ● Unless the technical services allow outside, cannot add other material to concentrate and diluent. After dilution with water, it is milky white liquid. ● The concentration of control may be achieved through the refractometer and refraction coefficient of diluent concentration percentage. Technical Indicators of SilibaseRA-4ZAL Release Agents for Die Casting Molds: Odor：Non strong smell Density：0.85g/ml Appearance：Transparent red brown liquid Working temperature：150℃-200℃ Flash point (COC)：Not applicable Refraction coefficient@20℃：1.2 Freezing point：-10℃ Ph (5% dilution)：7 Notify of SilibaseRA-4ZAL Release Agents for Die Casting Molds: ● Die-casting mold release agents must dilute with pure water or diesel oil, dilution ratio 1:100 ~ 1:120, gently shake or stir well before use; dilution ratio according to complexity of the casting and mould deep make appropriate adjustments. ● The spray gun or automatic system pay attention to spray evenly and blow dry. ● The best mould working temperature is 150 ℃ to 200 ℃. ● Die-casting mould release agent under normal temperature storage, pay attention to prevent frostbite prevent bask in, after opening attention hermetic seal good keeping. Packing and Shelf Life: 20Kgs/barrel, 170Kgs/drum, sealed and stored at room temperature for at least 18 months from manufacture date. |
